Unisys Off Campus 2026 Hiring Fresher Network Security Engineer | Bangalore
Unisys Off Campus 2026: Network Security Engineer Hiring in Bangalore
Unisys Network Security Engineer hiring is open in Bangalore under requisition REQ576504. According to the official Unisys listing, candidates with a BA/BS degree and 0 to 2 years of relevant experience can apply, so freshers are eligible. The role is full time and focuses on Fortinet and Palo Alto firewalls. Apply online on the Unisys Workday portal; no last date is shown.
This Unisys Off Campus 2026 guide covers eligibility, the firewall and cloud skills the listing asks for, salary, the expected selection process and how to apply. Facts come from the official listing unless they are marked as reported estimates.
Last updated: 5 November 2026
Quick Overview
| Company | Unisys |
| Role | Network Security Engineer (Firewall Security Engineer skill set) |
| Requisition ID | REQ576504 |
| Location | Bangalore, Karnataka |
| Batch | Not mentioned |
| Qualification | BA/BS degree, or an equivalent mix of education and experience |
| Experience | 0 to 2 years of relevant experience |
| Salary | Not disclosed (see the salary section for reported figures) |
| Employment type | Full time |
| Work mode / shift | Not stated in the listing |
| Interview rounds | Not officially disclosed |
| Last date | Not shown on the listing |
Important: The listing was posted on 3 November 2026. Workday openings can close without notice, so apply early.
Read Also:-
Qualcomm Off Campus 2026: Associate Engineer Jobs for 2027 Batch | Hyderabad, Chennai:- CLICK HERE
TCS BPS Hiring 2027: Eligibility, Salary, Test Pattern and Selection Process:- CLICK HERE
Table of Contents
- Quick Overview
- About Unisys and the Role
- Job Responsibilities
- Eligibility Criteria
- Skills Required
- Salary for Freshers
- Selection Process
- Interview Tips and Sample Answers
- How to Apply
- Important Dates
- Common Mistakes Freshers Make
- Frequently Asked Questions
About Unisys and the Network Security Engineer Role
Unisys is a global IT services and solutions company with a delivery centre in Bangalore.
The official listing describes the skill set as “Firewall Security Engineer (Basic Troubleshooting, Fortinet and Palo Alto, Any Firewall Experience)”. In plain words, you will help keep client firewalls healthy: checking rules, fixing traffic problems, watching logs and making approved changes, while working alongside senior security engineers.
The skill list is long, but the listing asks for only 0 to 2 years of experience, so treat it as the areas you will grow into.
Job Responsibilities
Based on the official Unisys listing, the work falls into five areas:
- Firewall operations: create, review and troubleshoot firewall and NAT policies on Fortinet FortiGate and Palo Alto devices, check HA status and failover, and help with firmware and content upgrades.
- Cloud networking: support firewalls deployed as virtual appliances in Microsoft Azure hub-spoke networks, including VNets, route tables, Route Server and ExpressRoute.
- Security operations: analyse threat logs, triage incidents and support senior engineers with containment and escalation.
- Process work: follow change plans and runbooks, keep documentation and diagrams current, and track work in ServiceNow, Jira or similar tools.
- Reporting: collect firewall metrics such as policy hit counts, blocked threats, VPN uptime and device health, and prepare weekly or monthly reports.
Unisys Network Security Engineer Eligibility Criteria
| Criteria | Requirement (official listing) |
|---|---|
| Education | BA/BS degree, or an equivalent combination of education and experience |
| Experience | 0 to 2 years of relevant experience |
| Branch | Not specified |
| Batch / passing year | Not specified |
| Location | Bangalore, Karnataka |
| Job type | Full time |
The listing does not name a branch. In practice, B.E./B.Tech graduates in CSE, IT or ECE and B.Sc/BCA graduates with networking knowledge are the closest fit for a firewall role. A CCNA, Fortinet NSE or Palo Alto PCNSA certificate also helps your resume.
Who should not apply
- Candidates without a bachelor’s degree or equivalent experience.
- Professionals with well over 2 years of experience looking for a senior firewall role, since this opening is entry level.
- Anyone with no interest in networking, as the whole role is firewall and network focused.
Skills Required
Technical skills
| Skill | Priority | What to practise |
|---|---|---|
| Networking basics | High | OSI model, subnetting, VLANs, ARP, ping and traceroute |
| Firewall concepts | High | Stateful inspection, zones, NAT (SNAT, DNAT, PAT), policy order |
| Fortinet FortiGate | High | FortiOS GUI and CLI, policies, diagnose debug flow, HA status |
| Palo Alto PAN-OS | High | Security and NAT policy, security profiles, test security-policy-match |
| Routing | Medium | Static routes, BGP peering basics, OSPF |
| VPN | Medium | IPsec site-to-site, SSL VPN, GlobalProtect basics |
| Azure networking | Medium | VNets, peering, NSGs, route tables, Network Watcher |
| SIEM and logs | Medium | Splunk, Microsoft Sentinel or FortiAnalyzer basics |
Soft skills
The listing stresses clear status updates, escalating blockers on time, careful documentation and following change plans with rollback steps.
Unisys Network Security Engineer Salary for Freshers
The official Unisys listing does not disclose the salary. We could not find reliable fresher data for this exact role, so treat the figures below as rough reported estimates only.
- Unisys campus hire (Bangalore): a candidate’s placement experience shared on Naukri Campus mentions a package of 5.30 LPA for a fresher role.
- Unisys System Engineer (all levels): Indeed shows an average of about 7.75 LPA, based on a small number of reported salaries.
- Unisys Senior Network Engineer (4+ years): AmbitionBox shows about 8.1 to 9.3 LPA at 4 years, rising with experience. This is not a fresher figure.
A fresher offer for this role would likely be closer to the campus figure than to the senior range. Confirm the CTC break-up with HR before you accept.
| Factor | How it affects pay |
|---|---|
| Experience (0 vs 2 years) | Candidates with hands-on firewall work may get a higher offer |
| Certifications | CCNA, NSE or PCNSA can help in negotiation |
| Shift | Not stated; if the role has night or rotational shifts, ask about shift allowance |
| Benefits | Not listed in the job post; confirm with HR |
Selection Process (Expected)
Unisys has not published the rounds for this role. For openings like this, the process usually looks like this:
- Resume shortlisting on the Workday portal.
- Technical interview 1: networking basics, subnetting, NAT, firewall policies and troubleshooting steps.
- Technical interview 2: Fortinet or Palo Alto scenarios, routing, VPN and your labs or projects.
- HR round: shifts, location, joining date and salary.
For comparison, a Unisys campus placement experience on Naukri Campus listed an aptitude test, a group discussion, two technical interviews and an HR round. Off campus openings often skip the aptitude and GD stages.
Interview Tips and Sample Answers
Expect “what would you check first” questions. Walk through your steps layer by layer. Our fresher interview kit has more practice questions.
Q1. A user cannot reach a server through the firewall. How do you troubleshoot?
Sample answer: I first confirm the source, destination and port. Then I check basic reachability with ping and traceroute, and look at the routing table. On the firewall, I check whether a policy matches the traffic and whether NAT is correct. On FortiGate I would use diagnose debug flow, and on Palo Alto test security-policy-match and the traffic logs. If the session reaches the server but no reply comes back, I check the return route for asymmetric routing.
Q2. What is the difference between SNAT and DNAT?
Sample answer: SNAT changes the source address, usually so that many internal users can reach the internet through one public IP. DNAT changes the destination address, usually so that traffic coming to a public IP reaches an internal server. PAT is a form of SNAT that also changes ports so many sessions can share one address.
How to Apply for Unisys Off Campus 2026
Applications are accepted only online through the official Unisys Workday portal. Keep your resume ready as a PDF.
- Click the Apply Link above to open requisition REQ576504.
- Click Apply and sign in, or create a Unisys candidate account with your email.
- Upload your resume. Put networking labs, firewall work and certificates at the top.
- Fill in your education, experience and personal details, and answer the screening questions.
- Review and submit, then track your status from your Workday account.
Fraud warning: Never pay any fee for a job application, interview or offer letter, and be careful with offers that come from personal email addresses or messaging apps. Apply only through the official Unisys link. For more verified openings, check our latest off campus jobs for freshers.
Important Dates
| Posted on (official) | 3 November 2026 |
| Last date to apply | Not shown; apply as early as possible |
Common Mistakes Freshers Make
- Getting scared by the skill list. The minimum is 0 to 2 years. Strong basics and lab practice can be enough to clear shortlisting.
- Weak networking basics. Many candidates know tool names but cannot explain subnetting or NAT. Interviewers test the basics first.
- No hands-on proof. Mention specific labs, such as a FortiGate or Palo Alto VM you configured, instead of only listing skills.
- Ignoring Azure. The listing gives a full section to Azure networking. Learn VNets, NSGs and route tables at least at a basic level.
Frequently Asked Questions
What is the last date to apply for Unisys Network Security Engineer 2026?
The official Unisys listing does not show a last date. It was posted on 3 November 2026, so apply as early as possible.
Can freshers apply for the Unisys Network Security Engineer role?
Yes. The listing asks for a BA/BS degree and 0 to 2 years of relevant experience, so freshers with a degree are eligible.
What is the eligibility for Unisys Off Campus 2026?
You need a BA/BS degree, or an equivalent mix of education and experience, and 0 to 2 years of relevant experience. No branch or batch is specified.
Can BTech students apply for this Unisys job?
Yes, B.E. or B.Tech graduates meet the degree rule. CSE, IT and ECE graduates with networking knowledge are the closest fit.
What is the Unisys Network Security Engineer salary for freshers?
Unisys has not disclosed the salary. A Unisys campus placement report mentions 5.30 LPA for a fresher role, but confirm the CTC for this role with HR.
What is the Unisys recruitment process for freshers?
Unisys has not published the rounds. Expect resume shortlisting, one or two technical interviews on networking and firewalls, and an HR round.
Is the Unisys Network Security Engineer job work from home?
The listing does not mention remote work. The role is listed for Bangalore, so plan to work from there and confirm the work mode with HR.
Is this a night shift job?
The listing does not state the shift. Firewall operations teams sometimes work rotational shifts, so ask the recruiter.
Which skills are needed for Unisys Network Security Engineer?
The listing asks for Fortinet FortiGate and Palo Alto PAN-OS basics, firewall and NAT concepts, routing, VPN, Azure networking, log analysis and documentation.
Where can I find official Unisys job openings?
Official openings are listed on the Unisys careers website and its Workday portal at unisys.wd5.myworkdayjobs.com.
Final Words
The Unisys Network Security Engineer opening in Bangalore accepts graduates with 0 to 2 years of experience. If you have solid networking basics and some Fortinet or Palo Alto practice, apply early and prepare troubleshooting scenarios for the interview.
Disclaimer: Hiring status, eligibility, salary and the selection process can change at any time. Always confirm the details on the official Unisys listing before you apply.
Check the official Unisys careers portal for the latest application details.
Leave a Reply